First Polymer Concrete trench drain with built-in 2.5% slope on the market
![First Polymer Concrete trench drain with built-in 2.5% slope on the market First Polymer Concrete trench drain with built-in 2.5% slope on the market](https://www.ulmaarchitectural.com/en-us/trench-drains/news/first-polymer-concrete-trench-drain-with-built-in-2-5-slope-on-the-market/@@images/6d7983af-6fb2-4e22-9857-2500cb0bc57f.jpeg)
ULMA Architectural Solutions presents the first trench drain incorporating a slope of 2.5%, developed under the most stringent quality standards demanded by the sector, such as the UNE-EN 1433 standard
Higher hydraulic capacity with sloping channels
These channels with built-in slope are the only ones on the market with a real slope of 2.5% which, thanks to their marked slope, provide greater hydraulic capacity, and resolve the slope limitations that can be found in some places.
Its most important advantages are:
- Hydraulic capacity -100 l/s in 20 ml. * Study conducted by the Universitat Politécnica de Catalunya
- Self-cleaning effect that allows the inside of the channel to remain clean at a low flow rate (from rainwater). It obtains a greater capacity to remove the sediment that can accumulate during heavy rains. This leads to a reduction in the need for maintenance.
- Possibility of installing up to 40 ml. It is possible to install two sections of 20 metres each, with a single water outlet.